Clas Ohlson LD2000-A, Руководство пользователя

Страница: 3 / 28

3
E
N
G
LI
S
H
6. Make sure the voltage is 12 V to get maximum pull. When you use the winch
maximum pull is obtained when the wire rope is wound just a few turns on the
drum. The more turns of wire rope on the drum, the less the pulling force.
7. Never fasten the wire directly around the object you want to winch, since this
can damage the winch.
8. Do not use straps of any kind.
9. Mount the winch properly on a vehicle or another fixed object before using.
10. In starting, unwind the wire rope slowly at first until the wire is taut. Then stop
to check all connections, Make sure the hook is firmly in place. It may be useful
to law a heavy felt blanket or jacket over the wire near the hook when you are
winching a heavy load. The material has a damping effect on the wire rope and
prevents it from flaying about in the air.
11. Do not move the vehicle the winch is mounted on to assist pulling. Doing this
can overload both wire rope and winch.
12. Never work on or near the winch drum when the winch is loaded. Keep a safe
distance of at least 1.6 m.
13. Never step over or crawl under the wire rope when the winch is in operation.
14. When you use the winch to move an object the vehicle’s gear box should be
in neutral, the parking brake should be on, and the wheels should be blocked
with stops. The motor should be running when the winch is in operation. If you
use the winch much for a long time with the motor off the battery will lose its
charge so it will be difficult to start later.
15. Never put the winch in neutral position when it is loaded.
16. Uncouple the load once you have finished using the winch. Do not leave the
wire under tension.
17. Always keep a safe distance to the wire rope, hook, and winch.
18. Inspect the wire rope and the rest of the equipment regularly. Worn and frayed
ropes should be replaced immediately. Use only approve spare parts. Use
sturdy leather gloves when you handle the wire rope. Do not let the wire rope
run through your hands.
19. Do not touch the winch, the taut wire rope or the hook when the winch is in
use. Never hold the hook with your finger. You can lose your finger if it gets
caught in the hook. Always used the safety catch to straighten the wire rope
when you are spooling in or out.
20. When you have finished using the winch keep the cable taut while you spool it
up again onto the drum.
21. Do not use the winch if you are under the influence of drugs, alcohol, or
medicine. Always stay alert when using the winch.
22. Wear eye and ear protection. Always us protective glasses. Use total face
protection if what you are doing produces metal filings or wood shavings.
Always use respiratory protection when working near metal, wood, chemical
dust, or chemical dust or vapors.
23. Do not make any modifications to the winch or weld anything to it.
24. Give the winch regular maintenance.