Clas Ohlson GN-BR33V-RH, Инструкция по эксплуатации

Страница: 17 / 72

17
E
n
g
li
s
h
5.2 The PING function
The PING function controls which devices/computers are connected to the network.
The PING command is used at the command prompt*.
1. Type
ping at the prompt, press [space] and enter the IP address or the computer
you want to “ping” and press [Enter].
2. “Request timed out” appears when the connection does not work (either because
the pinged computer is not turned on or correctly connected).
“Reply from…” appears when the connection works and the pinged computer is on.
A working connection should look like this: In this case the computer is connected
to a device with an IP address: 192.168.5.254.
* The PING tool can also be found in the router menu under the “Ping” tab.
5.3 Resetting
If you wish to start over from the beginning and return to default settings:
Alt. 1:
The reset button (INIT) on the bottom of the router resets it to the default factory
settings. Procedure:
• Switch the router on. Use a paper clip or similar and press [INIT] for 5–6 seconds
until the orange “PWR” light comes on. The router should now restart with de-
fault settings.
Alt. 2:
• Click on Initialization in the menu and then on Initialize Router . The router should
now restart with default settings.
N.B. All personal settings will be erased when doing a reset!