Clas Ohlson GN-BR33V-RH, Инструкция по эксплуатации

Страница: 15 / 72

15
E
n
g
li
s
h
I cannot
connect to
other devices
on the network: The computer’s IP
settings are incor-
rectly configured. Every computer should have a unique IP
address, check e.g. with the command
IPCONFIG. See the
Checking the confi-
guration section about how to check and
update the configuration.
Normally,
Obtain an IP address automa-
tically should be chosen (if you want to
use the router’s DHCP function).
Note!
Any changes may require a restart
for them to take effect.
The network cables
are incorrectly
connected. Try connecting using another
network cable.
I can connect
to the router
but not to the
Internet: The modem or
ADSL unit does
not work. Some Internet providers require the
modem to be turned off for 30–60 minutes
after inputting the router settings for the
connection to work.
Check that no firewall programme is
installed. If present, deactivate or configure
it for the internal network.
This router has a built-in firewall.
Cable error between
the WAN port on the
router and the mo-
dem or ADSL unit. Check the cable connections.
Wrong type of
connection is
used during Setup
(PPPoE, Dynamic
or Static). Check the settings for your type of
connection.
Username and
password for the
Internet provider is
possibly wrong. Enter the correct username and password.
Differentiate between
capital letters and lower-case letters.
Always read through the instructions and
rules received from your Internet provider.
There may be certain restrictions regarding
the sharing of a connection.