Clas Ohlson Besco BN1850, Руководство пользователя

Страница: 6 / 36

1. Undo the locking
cach and slide out
the magazine.
3. Slide the magazine
back into place.
4. Push it all the way in, until
the locking catch ”clicks”.
2. With the magazine completely open, insert
the nails. The tips of the nails must sit on the
bottom of the magazine.
6
E
N
G
LI
S
H
Contact-Operated Tools
All tools with safety triggers (for contact-operation) are labelled with a downwards point-
ing equilateral triangle. Do not try to use a tool with such a label if the safety trigger is
missing or appears to be damaged.
1. Sequential operation
• Sequential operation requires that the operator hold the muzzle of the gun against
the workpiece with the safety trigger depressed before he/she pulls the trigger.
• In order to drive in more nails the operator must release the trigger and lift the tool off
the workpiece before repeating the procedure described above.
• This type of nail gun is better for more accurate nailing, e.g. nailing frames, etc.
• This sequential operation allows for the exact positioning of fasteners without
the chance of driving in a second nail on the recoil, as described in “2. Contact-
operation” below.
• Sequential operation is a safer system because it is not possible to drive in a second
nail by mistake if the tool is in contact with the workpiece – or something else – whilst
the operator is holding the trigger.