3
English
Spray Gun
Art.no 40-9866 Model AS1007
Please read the entire instruction manual before using the product and then save
it for future reference. We reserve the right for any errors in text or images and any
necessary changes made to technical data. In the event of technical problems or other
queries, please contact our Customer Services (see address details on the back).
Safety
Caution:
Toxic vapours and mists can be produced when the spray gun is used.
The inhalation of toxic substances can cause serious damage to health. Always wear
protective eyewear, gloves and a respirator to prevent toxic substances from entering
the body through contact with the skin, eyes or inhalation.
• Always work in well-ventilated areas to avoid exposure to concentrations of
flammable or toxic substances.
• Never use oxygen or any kind of gas in pressurised bottles as a propellent for
the coating material. Doing so can lead to an explosion or serious personal injury.
• Never use the spray gun closer than 8 m to the air compressor. If possible,
the compressor should be located in another room. Never spray towards
any part of the air compressor, electrical connections or switches.
• Liquids and solvents can be combustible or highly flammable. The product must
only be used in well-ventilated areas where there are no sources of ignition such
as people smoking or naked flames.
• Never spray combustible materials close to naked flames or any equipment which
could generate sparks. Motors, electrical equipment and switches can generate
sparks which can ignite combustible gases and fumes. Never store combustible
liquids or gases close to an air compressor.
• Do not use the product incorrectly. Prolonged exposure to vibrations, irregular or
repetitive spraying actions can lead to hand and arm injuries. Stop working if you
experience any kind of pain, tingling, numbness or other symptoms.
• Always follow the manufacturer’s recommendations when using and cleaning
the product.
• Never spray acids, corrosive liquids, toxic chemicals, fertilisers or insecticides.
Doing so could result in death or serious injury.
• Disconnect the product from the air compressor and empty the paint cup before
cleaning the product and when it is not in use. It is a good idea to install an air
shut-off ball-valve in the air supply hose so that you can quickly shut off the air
supply if necessary.
• Use a clean, dry and regulated supply of compressed air at a pressure of 2.0–3.5 bar.
Never exceed the maximum operating pressure of 5 bar.
