15
English
The factory settings of the camera are as follows:
“Language”
English
“Camera Mode”
Still image
“Set Clock” Time and date
Not set
“Photo Size”
12 megapixels
“Photo Burst”
1 photo
“Video Size” Video resolution
1280 × 720
“Video Length” Length of video
10 sec
“Time Lapse”
Off
“PIR Trigger” The motion sensor sensitivity
Normal
“PIR Interval” The motion sensor activation
5 sec
“Work Hour” Time when the camera will work
Off
“MMS Set” Setting the MMS function
Not set
“GPRS Set” Setting GPRS
Not set
“Send Mode” When messages are to be sent
Manual
“Send to” Where messages are to be sent
MMS to phone
“SMS Control”
Off
“Position ID” Name the camera
Off
“Version” Shows current software version
—
“Format SD” Formatting the memory card
—
“Default Set” Restores factory settings
—
Performing settings using the remote control
Note:
The camera settings can be performed using the remote control but it is much
easier to perform settings on your computer in the way described in the
Settings
section above. We recommend that you only use the remote control for simple setting
adjustments when you do not have access to a computer.
1. Set the function switch to the
TEST
mode.
2. Press [ MENU ], the first submenu, “Setup Language”, is shown.
3. Advance to the desired menu with [
▼
2 abc ] or [
▲
Cancel ].
4. The current setting for the selected menu is highlighted on the display.
5. If you want to change the setting for the selected menu, press [
◄
1
] or [
►
3 def ]
to make the change. Each press will change the setting one step.
6. Press [ OK ] to confirm.
7. Press [ MENU ] to exit the menu.
