8
9
English
Showing saved data
[ LIGHT ]
[ ST/STP ]
[ MODE ]
[ RESET ]
[ MODE ]
[ RESET ]
1. Press [ MODE ] repeatedly until “DATA” appears on the display.
2. Press [ RESET ] several times until the desired saved information is
displayed from your latest training session.
-
TOTAL
displays recorded training session time
-
INZONE
displays recorded time spent within the set pulse parameters
-
CAL
burned calories
-
HIGH
maximum heart rate
-
AVG
average pulse rate
5. Alarm setting
1. Press [ MODE ] repeatedly until “ALARM”
appears on the display.
2. Hold in the [ LIGHT ] button for a few seconds
until “Hold” and “Adjust” begin to flash.
After a few seconds “HOUR” will show and
the hours display will begin flashing.
3. Enter the correct hour by pressing
the [ ST/STP ] button to increase the hour
value or the [ RESET ] button to decrease
the hour value.
4. Press [ MODE ] to confirm and continue
using the same procedure for setting
the minutes.
5. Exit settings mode by pressing [ LIGHT ].
6. Turn the alarm on and off by pressing [ ST/STP ]. Alarm icon
is shown
when the alarm is activated. “
–
–”
is displayed when the alarm is deactivated.
