Push Block
Should the Riving Knife subsequently become out of shape or misaligned, it must be gently eased
back into line, or if the damage is more severe, it must be removed and bent back into shape
accordingly or replaced.
3. The Saw Blade
Check to ensure the blade is sound. If teeth are chipped, or cracks are apparent, it must be renewed.
4. The Blade Guard
Ensure the Blade Guard is in place, pivots freely, and falls under its own weight. (DO NOT overtighten
the mounting bolt).
No further adjustments should be necessary, but before you proceed to use the machine, it is
recommended that you apply a coat of paste wax to the table to reduce friction when pushing the
workpiece. Wipe the table thoroughly with a clean dry cloth.
Fig.11
Push Block
Make the Push Block using pieces of 10mm
plywood and 19mm hardwood as shown opposite.
The small piece of wood 10x10x64mm should be
GLUED to the plywood. DO NOT USE NAILS,This is
to prevent damaging the saw blade in the event
you mistakenly cut into the push block. Position
the handle in the centre of the plywood and fasten
together with glue and wood screws.
Auxiliary Fence
Make one using pieces of 10mm plywood
and19mm hardwood. Fasten together with glue
and wood screws, illustrated opposite.
NOTE:
Since the Push Black is used with the
AuxiliaryFence, the 140mm dimensions (A), must
be held identical on both the pieces,
HELPFUL HINTS
Work Helpers
Before cutting any wood on your saw, study all of the Basic Saw Operations.
Notice that in order to make some of the cuts, it is necessary to use certain devices. ‘Work Helpers’,
such as a Push Block or an Auxilliary Fence, both of which you can make yourself.
After you have made a few practice cuts, make up these ‘helpers’ before starting any projects.
Fig.12
2
