Clarke Woodworker 6462160, Инструкция по эксплуатации и обслуживанию

Страница: 12 / 16

12
• All bearings etc, in this tool are lubricated with a sufficient amount
of high grade lubricant for the tools lifetime under normal operat-
ing conditions, therefore no further lubrication is required.
• Only use the replacement blades specified for this product (consult
your CLARKE dealer).
FAULT FINDING
JIGSAW DOES NOT OPERATE WHEN SWITCHED ON
Check to ensure the fuse is sound and replace if necessary. If the fuse is
sound or blows repeatedly, consult your CLARKE dealer.
JIGSAW IS OVERHEATING
This indicates the machine is dirty. Clean the ventilation holes and blow out
with compressed air or clean with a dry cloth.
Overloading the machine will also cause overheating. Do not use for heavy
duty work and do not apply excessive pressure.
EXCESSIVE SPARKING OCCURS
This indicates worn brushes. This problem is quickly remedied by replacing the
brushes or alternatively contact the Clarke Service department for their
replacement.
EXCESSIVE VIBRATION
Disconnect the mains lead and check that the blade is correctly fitted see
page 9. If the blade is damaged replace it with a new one.
If vibration persists, consult your local Clarke dealer, or contact the Clarke
Service department.
SPARE PARTS
Replacement saw blades for wood, plastic and steel are available from your
CLARKE dealer. Refer to your Clarke dealer or service department if internal
maintenance is required.
Replacement Blades (3 per pack)
Steel:- part no. 6460210
Wood:- part no. 6460215
Plastic:- part no. 6460220