A - 2
Ultra Speed Pro 1500 - 56091114
12/13
INSTRUCTIONS FOR USE
A - ENGLISH
TABLE OF CONTENTS
Page
Safety Precautions ....................................................................A-2
Machine Operation ....................................................................A-3
Machine Maintenance & Storage ..............................................A-3
Handle Assy .....................................................................D-2 – D-3
Base Assy ........................................................................D-4 – D-5
Wiring Diagram ......................................................................... D-5
SAFETY PRECAUTIONS
This machine is intended for commercial use. It is constructed for use in an indoor environment and is not intended for any other use. Use only
recommended accessories.
All operators shall read, understand and exercise the following safety precautions:
1) Do not operate machine:
•
Unless trained and authorized.
•
Unless you have read and understand operators manual.
• In
fl
ammable or explosive areas.
•
With damaged cord or plug.
•
If not in proper operating condition.
•
In outdoor areas.
•
In standing water.
•
With the use of extension cords.
2) Before operating machine:
•
Make sure all safety devices are in place and operate properly.
3) When using machine:
•
Only use approved burnishing pads.
•
Do not run machine over cord.
•
Do not pull machine by cord or plug.
•
Do not pull cord around sharp edges or corners.
•
Ensure the dust collection bag is in place and is tightly sealed to the machine.
•
Turn power switch to “off “ prior to unplugging machine.
•
Do not unplug by pulling on the cord.
•
Do not stretch cord.
•
Do not handle plug with wet hands.
•
Keep cord away from heated surfaces.
•
Do not pick up burning or smoking debris such as cigarettes, matches or hot ashes.
•
Report machine damage or faulty operation immediately.
4) Before leaving or servicing machine:
•
Turn off machine.
•
Unplug cord from outlet.
5) When servicing machine:
•
An experienced technician should only perform service work.
•
Unplug cord from outlet.
•
Use manufacturer supplied or approved replacement parts.
Grounding Pin
Adapte
Metal Scre
FIGURE 1
Grounded Outlet Box
Grounded Outlet
GROUNDING INSTRUCTIONS
This machine must be grounded! Grounding provides the path
of least resistance for electrical current. To reduce the risk of
electrical shock should the machine malfunction, the machine has
a special grounding plug. Do not remove the ground pin under
any circumstances! To avoid electrical shock, please replace the
power cord immediately if any damage is being detected. The
replacement must be performed only by an authorized person .
