ENGLISH
8
Operator’s Manual - SW 26
TROUBLESHOOTING
WARNING!
Except the procedures shown in this Manual, the operator should not try to perform other repair procedures
on the machine.
Repair and services must be performed by Clarke authorized technicians.
The following instructions should be useful to solve some machine problems. If the suggested remedies are not effective, it is
necessary to contact the Service Center.
Trouble
Possible Cause
Remedy
The machine does not move smoothly.
The side or main brooms are too low.
Adjust the brooms.
There is a big foreign object caught into the
brooms.
Remove the object.
The debris collection is not eficient.
There is a rope or other foreign object caught
by the main brooms.
Remove the rope or the object.
The hopper is full.
Empty the hopper.
The side or main brooms are too high.
Adjust the brooms.
The brooms are too worn.
Replace the brooms.
The machine produces excessive dust during
operation.
The hopper is full.
Empty the hopper.
The machine speed is too high.
Reduce the working speed.
The machine leaves dust marks.
Some dust may collect inside the housing
behind the brooms.
Remove the dust from the housing.
SCRAPPING
Have the machine scrapped by a qualiied scrapper.
https://harrissupplyind.com - To Order Parts Call 608-268-8080