3
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
SAFETY PRECAUTIONS
• Due to the weight of the product the help of an assistant may be required
during installation. Secure the spring compressor to a firm level floor using
suitable anchor bolts (not supplied).
• Before starting work, check for signs of cracked welds, loose or missing bolts,
damaged guards, or any structural damage. Do not operate if any of these
conditions exist. Have repairs made only by an authorised service centre.
• Never tamper with the components or modify them. The safety valve is
calibrated and sealed at the factory; do not attempt to change the setting.
• Use only the recommended hydraulic oil.
• The components of this product are designed to withstand the rated load.
Do not substitute any other components or exceed the rated load.
• Before applying pressure, ensure the workpiece is secure and stable.
• Always clean up spills of hydraulic oil immediately as this can be dangerous
in a workshop environment.
• Do not allow any person who is unfamiliar with spring compressors to use this
item unless they are under direct supervision.
• Keep children and unauthorised personnel away from the work area.
• Always apply the spring centrally under the centre of the ram. Offset loads
can damage the ram and may cause the spring to be ejected.
• Always ensure the spring is properly supported.
• Springs may be ejected from the spring compressor. Always use the guards
supplied.
• Keep hands and fingers away from parts that may pinch or shift.
• Never use extension tubes to increase the length of the pump handle.
Excessive effort can cause damage and/or accidents.
• Wear approved impact safety goggles and heavy duty work gloves.
• Failure to heed these warnings may result in damage to the equipment, or
serious personal injury.
• The following safety symbols appear on the product.
Read instruction
manual before use
Wear safety glasses
Содержание SSC1000G
Страница 12: ......
