OUTLET PRESSURE ADJUSTMENTS
CFP9BH
PORTABLE COMPRESSORS
1.
Pressure Adjusting Knob
2.
Outlet Taps
3.
Quick Fit Nuts
4.
Pressure Gauge
To adjust outlet pressure:
To increase pressure - turn knob (1) clockwise.
To decrease pressure - tur n knob (1)
anticlockwise.
Outlet taps
- slide knurled section (2) away
from body to open, push towards body to
close.
NOTE: Pressure Gauge (4). Pressure shown will differ by approximately 1 bar
depending on whether the outlets are open/closed.
STATIONARY COMPRESSORS
These machines are not supplied with the facility to adjust outlet pressure. A
comprehensive range of airline accessories is available from your local CLARKE
stockist.
To adjust outlet pressure
- slacken lock nut (2). Turn Pressure Adjusting Knob (1)
clockwise to increase outlet pressure, anticlockwise to decrease. Tighten lock nut
(2) when correct pressure is obtained.
NOTE:
1.
When Compressor reaches cut-out pressure air will bleed from bleed hole (4).
2.
Item (3) quick fit nut can be removed if required and hose can be fitted using
1/4 BSP nut.
1.
Pressure Adjusting Knob
2.
Lock Nut
3.
Air Outlet
4.
Bleed Hole
Fig.6
Fig.7
12
