RS-16 Rotary Sander
Step Action
3
WARNING: Be prepared to control the machine as soon
as the motor starts. Just a slight up or down movement
of the handle will make the machine move from side to
side. Raise the handle to go right. Lower the handle to
go left.
CAUTION: Immediately start moving the machine back
and forth. Keep the machine moving while the motor is
running to avoid damage to the floor.
4
After use:
a.) Place the operator handle in the upright position.
b.) Unplug the power cord.
c.) Remove the pad driver from the machine.
d.)
NEVER
store the machine with the pad driver on the
machine.
Questions or Problems?
Contact Clarke
Technical Service at
800-356-7274.
Need more
information?
The instructions on this
sheet are abbreviated
instructions only and are
provided solely as a
customer service. They
are not meant to replace
the tool’s operation
manual. If you are
unsure of the tool’s safe
and proper operation,
please request an
operator’s manual from
one of our sales
associates.
