6
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
ASSEMBLY
FITTING THE WHEELS
1. Insert the axle as shown.
• Rotate the axle so that the
spring loaded pin pops
throught the hole on the frame.
2. Fit the wheels to the axles and
secure with the locking nut
supplied.
NOTE:
Do not overtighten the nuts,
the wheels must be able to
rotate freely.
FITTING THE RUBBER FOOT
1. Fit the rubber foot as shown.
• Secure with the nut and spring
washer supplied.
ASSEMBLE THE LANCE
1. Connect the spray wand to the
lance and tighten securely.
FOLDING HANDLE
1. Lift the handle into the open
position.
2. Secure in place using the handle
locking knobs shown.
