Clarke MMA140, Инструкция по эксплуатации и техническому обслуживанию

Страница: 2 / 20

2
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
INTRODUCTION
Before attempting to operate the machine, it is essential that you read this
manual thoroughly and carefully follow all instructions given. In doing so you
will ensure the safety of yourself and that of others around you, and you can
also look forward to the welder giving you long and satisfactory service.
MAIN FEATURES
GUARANTEE
This CLARKE product is guaranteed against faulty manufacture for a period of
12 months from the date of purchase. Please keep your receipt as proof of
purchase.
This guarantee is invalid if the product is found to have been abused or
tampered with in any way, or not used for the purpose for which it was
intended.
Faulty goods should be returned to their place of purchase, no product can
be returned to us without prior permission.
This guarantee does not effect your statutory rights.
UNPACKING
Any damage or deficiency should be reported to your CLARKE dealer
immediately. You should find inside the box the following:
ARC-FORCE automatically increases the current to prevent the elec-
trode sticking when operating with a short arc length .
HOT START increases the welding current at the beginning of the
welding process.
ANTI-STICK the electrode can be easily withdrawn without it becom-
ing damaged.
VOLTAGE REDUC-
TION SAFETY DEVICE
(VRD) reduces open circuit voltage when not in use to prevent
accidental injury .
• 1 x MMA Inverter Welder • 1 x Wire Brush / Hammer
• 1 x Torch Cable with Electrode Holder • 1 x Earth Clamp & Cable