Clarke MCD1, Инструкция по эксплуатации и техническому обслуживанию

Страница: 7 / 8

7
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
OPERATION
1. Rotate the carriage handles (9 &
18) downward to stop the dolly
from moving.
• This makes it easier to push the
motorcycle onto the dolly.
2. Remove the stopper rod (10) from
one end.
3. Push the motorcycle on to the
dolly.
• The kick stand should be on the
same side as the side table (7).
4. Replace the stopper rod (10).
• Secure the motorcycle to the
dolly using straps (not supplied)
to prevent the motorcycle
toppling over whilst being moved.
5. Rotate the carriage handles (9 &
18) upwards to allow the dolly to
be moved again.
6. ALWAYS have the carriage
handles in the down position
when working on the motor cycle,
to stop the dolly from moving.
SPECIFICATIONS
Model Number MCD1
Maximum Load 1250 lbs (567 kg)
Weight 30.3 kg
Maximum Tyre width 200 mm