Clarke MCD1 Скачать руководство пользователя страница 2

2

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

INTRODUCTION

Thank you for purchasing this CLARKE Motorcycle Dolly.

Before attempting to operate this product, it is essential that you read this 
manual thoroughly and carefully follow all instructions given. In doing so you 
can look forward to the product giving you long and satisfactory service. 

GUARANTEE

This CLARKE product is guaranteed against faulty manufacture for a period of 
12 months from the date of purchase. Please keep your receipt as proof of 
purchase. 

This guarantee is invalid if the product is found to have been abused or 
tampered with in any way, or not used for the purpose for which it was 
intended.

Faulty goods should be returned to their place of purchase, no product can 
be returned to us without prior permission. 

This guarantee does not affect your statutory rights. 

UNPACKING

Unpack and

 

check the contents with the list below. Should there be any 

damaged or missing parts, contact your supplier immediately.

20 x Hex Bolts M6 

10 x Nut M8

8 x Cheese Head Bolts

1 x Side Tray

8 x Hex Bolts M8

2 x Main Frames

2 x Countersunk Bolts M8

5 x Castors

28 x Flat Washers M6

4 x Connecting Plates

28 x Spring Washers M6

2 x Carriages (Carriage A and Carriage B)

28 x Nuts M6

2 x Stopper Rods

10 x Flat Washers M8

2 x Connecting Bars

10 x Spring Washers M8

1 x Instruction Manual

Содержание MCD1









Отзывы: