7
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
USING THE MAINS CHARGER
1. Plug the charger into a mains power outlet.
2. Insert the charging connector into the Charging Input socket on the jump
starter control panel.
• The digital display will show “
CHARGING BATTERY
”
and a reading of
the battery's percent of charge will be displayed.
• The display will show “100%” once the internal battery is fully charged.
3. When charging is complete, unplug the charger and disconnect it from the
jump starter.
4. Recharge the jump-start battery after every use if possible, or at least every
90 days.
5. Always avoid leaving your jump-start in a discharged state.
• Charging could take several hours, dependant upon the state of
charge. Keep the battery charged to ensure maximum life from the
battery.
RUNNING/CHARGING USB DEVICES
The jump starter has two standard USB
ports providing up to 2A at 5V DC.
1. Press the Power Button.
• The screen will show the battery
level and “USB 12V ON”.
2. Plug the USB connector into the
USB output port on the front panel
of the jump starter.
3. Plug the appropriate connector
on the USB cable into the device.
4. Turn your device on if necessary.
5. When finished using, turn off your device and unplug it from the USB cable.
RUNNING/CHARGING DC APPLIANCES
The standard auxiliary outlet socket provides a continuous 12V DC output, at a
maximum of 10 Amps
to power 12V DC devices such as tyre inflators, coolers
etc.
1. Verify the jumpstarter is fully charged. Recharge if needed.
2. Make sure the appliance to be powered is turned off and its power
requirements do not exceed 10A.
Содержание JS1224Li
Страница 16: ......
