Clarke JS1224Li Скачать руководство пользователя страница 2

2

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

INTRODUCTION

Thank you for purchasing this CLARKE Jump-start.

The JS1224Li is a rechargable power pack which can be used to start a car in 
the event of a flat battery. The unit can also be used to power electrical 
appliances via a cigarette lighter type socket using the adaptor supplied. The 
unit also incorporates a built-in lamp and may be used as a stand alone light 
source

A visual warning will appear in the event that the clamps are 

incorrectly fitted for jump starting (wrong polarity).

Before attempting to use this product, please read this manual thoroughly and 
follow the instructions carefully. In doing so you will ensure the safety of yourself 
and that of others around you, and you can look forward to your purchase 
giving you long and satisfactory service.

Please keep these instructions in a safe place for future reference.

SPECIFICATIONS

Please note that the details and specifications contained herein, are correct 
at the time of going to print. However, CLARKE International reserve the right 
to change specifications at any time without prior notice.

Item

Specification

Weight

2.8 kg

Insulation Class 

Class III (Device) / Class II (Charger)

Max Output Current (12V)

Starting 600A
Peak 1200A

Max Output Current (24V)

Starting 300A
Peak 600A

Input Voltage/Current

15 V / 1A

Battery Type

Sealed re-chargeable lithium-ion
12.8V/32,000 mAh

Auxiliary (Lighter) Socket output

12V DC /10A

USB2 Power Supply

5 V DC - 2A

Estimated engine starting capacity

Up to 5 litres (diesel) or 
8 litres (petrol)

Maximum cranking time

8 seconds

Full charging time

10 hours

LED flashlight

3W/350 lumens

Содержание JS1224Li

















Отзывы: