8
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
CONNECTING THE HIGH PRESSURE HOSE TO THE GUN ASSEMBLY
1. Screw the high pressure hose onto
the gun assembly.
• Tighten the connector, hand
tight only, Do not use a
spanner.
NOTE:
Make sure the connection is
secure.
CONNECT THE WATER SUPPLY
Always follow the regulations of you local water supplier. The pressure washer
must never be connected to the drinking water supply without using a system
separator (also known as a backflow preventer).
NOTE:
Water that has flowed through a system separator is considered
non-drinkable.
1. Connect a water supply hose (not
supplied) to the water inlet.
NOTE:
Use a good quality fibre-
reinforced water hose with a
standard coupling (Minimum
diameter 1/2 inch (13 mm)).
ATTACH THE SPRAY ACCESSORIES
1. Slide the spigot end of the spray
accessory into the gun assembly.
2. Push in firmly and twist 90° to lock
it into position.
