11
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
APPLYING CHEMICALS AND CLEANING AGENTS
To improve the cleaning performance, you can introduce chemical cleaning
agents (detergents) to the water jet using the detergent bottle and nozzle. This
is particularly useful when washing cars, greasy engine parts, removing oil
spots on concrete etc.
To prepare for detergent application,
1. Ensure the trigger lock is in the
locked position and the machine
is switched OFF.
• It is not necessary to pull the
trigger to release the pressure.
2. Remove the lid from the
detergent tank and fill with the
required amount of detergent.
• Only use detergents
recommended for use with
pressure washers, such as
CLARKE Traffic Film Remover
which is a powerful low
foaming agent for car
cleaning, patio cleaning etc.,
or CLARKE Wash & Wax, both available from your CLARKE dealer.
3. When the tank is filled with detergent, replace the lid.
4. Switch ON the pressure washer, release the trigger lock and spray the
detergent onto the vehicle, patio etc.
• Allow the detergent a little time to work itself into the grime.
5. To rinse pour out any remaining detergent from the detergent tank and use
the pressure washer as normal.
CAUTION: IF YOUR EYES COME INTO CONTACT WITH ANY CLEANING
FLUIDS, RINSE THEM IMMEDIATELY WITH PLENTY OF FRESH CLEAN WATER.
AND SEEK MEDICAL ADVICE IF REQUIRED.
