8
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
ASSEMBLING THE LANCE
The lance must be fitted to the gun
assembly before use.
1. Assemble by screwing the end of
the lance into the gun assembly.
2. Tighten the locking nut using a 22
mm spanner.
3. Slide the plastic cap into position.
CONNECTING THE GUN TO THE HOSE
Connect the gun to the hose by
screwing on the connector and
tightening with a 17 mm spanner.
CONNECTING THE MAINS WATER SUPPLY
NOTE:
Always follow any regulations of
your local water supplier.
1. Screw the inlet adaptor to the
water inlet as shown.
2. Connect the mains water supply
hose to the inlet adaptor. A
standard garden hose is suitable.
• It is recommended to use a
reinforced hose with an inner
diameter of at least 10 mm
available from your CLARKE
dealer.
• Ensure the water connection is secure.
NOTE:
The water source must provide
a minimum of 6.6 litres per minute
at not more than 40°C.
Содержание JET 9000
Страница 24: ......
