background image

3

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

 GENERAL SAFETY RULES 

1. High pressure water jets can be dangerous if subject to misuse. They must 

not be directed at animals or people.

2.

NEVER 

allow children or untrained personnel to use this product.

3.

NEVER 

operate the power washer with any covers removed.

4.

NEVER 

attempt any electrical or mechanical repairs to this power washer. 

Always refer to your Clarke dealer.

5.

NEVER 

supply any liquid other than water to the water inlet.

6. Never

 

use the detergent facility to introduce flammable liquids/solvents, 

e.g. paint thinners, petrol, oil due to risk of explosion.

7.

ALWAYS

 release any residual pressure in the machine by turning off the 

water supply and operating the trigger, before disconnecting the hose.

8.

ALWAYS 

keep the pressure washer itself dry and clear of water spray.

9. Never direct the spray jet at the pressure washer itself or any other 

electrical equipment.

10.

ALWAYS

 wear protective clothing, safety shoes and safety glasses. Loose 

particles & other debris may be propelled at high speed by the water jet.

11.

ALWAYS

 hold the spray gun firmly & expect the gun to ‘kick’ when starting.

12.

ALWAYS 

disconnect from the water supply and ensure the machne is 

completely drained when not in use. Store in a cool dry location.

13. Only use chemical cleaning agents (detergents), that are approved for 

pressure washers. CLARKE Traffic Film Remover or CLARKE Wash and Wax 
(available from your dealer), are recommended.

14.

ALWAYS

 disconnect from the electrical power supply and remove the plug 

from the socket before carrying out any maintenance.

15. O

N LY

 use o riginal sp are parts from the Clarke service department.

16. High pressure hoses, fittings and couplings are important for the 

safety of the m a c h i n e .   U s e   o n l y   h o s e s ,   f i t t i n g s   a n d   co u p l i n g s  
r e c o m m e n d e d   b y   t h e   manufacturer.

17.

N E V E R

  u s e   t h e   p r e s s u r e   w a s h e r   i f   t h e   p o w e r   c a b l e   o r   o t h e r  

i m p o r t a n t   p a r t s   o f   t h e   p o w e r   w a s h e r   a re   damaged.

18. If an extension cable is used, the cable and plug must be of 

watertight construction. Inadequate extension cables can be 
dangerous.

WARNING: WATER AT HIGH PRESSURE CAN BE DANGEROUS AND CAN 
CAUSE DAMAGE IF THE OPERATOR IS CARELESS. NEVER ALLOW ANYONE 
TO OPERATE THIS MACHINE UNLESS THEY ARE FAMILIAR WITH THE SAFETY 
PRECAUTIONS.

Содержание JET 9000

























Отзывы: