14
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
CLEANING AND MAINTENANCE
Correct maintenance is vital for smooth operation of the burner in order to
avoid wasting fuel and causing atmospheric pollution.
This heater should be inspected, cleaned and serviced annually by a qualified
service engineer. Unauthorised persons should not attempt to carry out repairs
of the burner components.
In the event of damage or broken components, replacements are available
from Clarke Parts & Service Department.
CLEANING
1. Use a damp cloth wrung out in a solution of soapy water to clean the
exterior of the heater. Use mild household cleaners on difficult spots.
2. Never use abrasive cleaners as they may damage the paint finish.
3. If you suspect the fuel has become contaminated with dirt or water, empty
the tank and refill with fresh fuel.
4. The fuel filter should be lifted out
and inspected for cleanliness
before refilling the tank and
cleaned if necessary by rinsing it in
kerosene.
5. The internal heating surfaces and
combustion chamber of the
burner should be cleaned at least
annually during servicing. This task
should be left to the Clarke
Service Department.
NOTE:
Do not attempt to serivice the heater yourself. Servicing and
maintenance should be left to the Clarke Sevice Department.
NOTE:
Using this heater without proper maintenance or with
contaminated or old fuel may lead to improper combustion and
possible soot production.
WARNING: BEFORE CARRYING OUT ANY ADJUSTMENT OR
MAINTENANCE, ENSURE THE HEATER IS SWITCHED OFF, DISCONNECTED
FROM THE MAINS SUPPLY, AND HAS BEEN GIVEN ADEQUATE TIME TO
COOL DOWN.
