8
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
TROUBLESHOOTING
Problem
Causes related to the EPC800.
Other possible causes
The pump
does not start
The internal PCB is broken
Voltage failure
Pump jammed
Electric cables incorrectly
wired
The pump
does not stop
The internal PCB is broken
The flow detector is blocked in
the upper position
The reset button is blocked
The pump is unable to provide
sufficient pressure
Presence of leaks which are
higher than the minimum
flow 0.6 I/min
-Intermittent
pump
working
The internal PCB is broken
The pump does not provide
sufficient pressure
Presence of leaks which are
lower than the minimum
flow 0.6 I/min
The pump is
jammed
The internal PCB is broken
The pump provides a pressure
which is lower than the restarting
pressure
Water failure
suction problems
For other possible problems, consult the pump instruction manual.
