Clarke ECSS2 Скачать руководство пользователя

Страница: 13 / 17

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

CLEANING AND MAINTENANCE

CHANGING THE GRINDING DISC

1. Remove the three screws holding

the Grinding Wheel Cover. Set the
cover aside.

2. Unscrew the Grinder Lock Cap

that holds the Grinding Wheel in
place.

3. Install the new wheel on the

Grinding Wheel Base, making sure
it fits properly.

4. Replace the Grinder Lock Cap.

5. Replace the Grinding Wheel Cover

• Only use grinding discs with a

diameter of 108 mm.

• Replacement grinding disc

speed must meet or exceed the
RPM rating of the sharpener.

• Replacement discs are

available from your Clarke
dealer part number (3402079)

NOTE:

Do not use a grinding wheel if it

is chipped, cracked, or worn.

WARNING: BEFORE STARTING ANY CLEANING OR MAINTENANCE
PROCEDURES, DISCONNECT THE PLUG FROM MAINS SUPPLY.

WARNING: NEVER OPERATE THE SHARPENER WITHOUT THE GRINDING
WHEEL COVER IN PLACE.

Содержание ECSS2


















Результаты поиска

Содержание ECSS2

Отзывы:

Похожие инструкции для ECSS2

Бренды по названию

Популярные бренды

Clarke ECSS2, Инструкция по эксплуатации и техническому обслуживанию

Результаты поиска

Содержание ECSS2

Отзывы:

Похожие инструкции для ECSS2

Бренды по названию

Популярные бренды