10
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
SHARPENING A CHAIN
NOTE:
Sharpen all the teeth on one side first (every other tooth) before
adjusting the angle to complete the job.
1. Put on your protective goggles and make sure the immediate area is clear
of bystanders.
2. Plug in the power cable and push
the (I) button to turn on the
sharpener.
3. Slowly lower the grinding wheel to
sharpen the tooth.
• If you notice slight errors in your
settings, turn off the sharpener
and unplug it before you make
your adjustments.
4. After sharpening the tooth, release
the top housing and turn off the sharpener.
5. Rotate the handle anti-clockwise,
and move the chain so that the
next tooth on that side of the
chain (every other tooth) is
positioned against the chain stop.
6. Re-tighten the handle to lock the
chain in place.
7. Turn the sharpener back on and
repeat this process until you have
sharpened all of the teeth on this
side (every other tooth) of the chain.
8. Loosen the locking wheel and rotate the chain holder assembly to the
same angle on the other side of the 0 on the scale then retighten the
locking wheel.
9. Place the first tooth that hasn't been sharpened in position against the
chain stop.
10. Repeat the sharpening procedure for the remaining teeth on the chain.
WARNING: WHEN SHARPENING, ALWAYS WEAR SAFETY GOGGLES.
Содержание ECSS2
Страница 17: ......
