2
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
INTRODUCTION
Thank you for purchasing this CLARKE Pump.
The DFTP230 pump is a self-priming rotary vane pump equipped with a by-pass
valve and built-in filter on the inlet side. It is designed only for use with diesel
fuels, parafin and light fuel oil. It must not be used with water, petroleum fuels
or alcohol, nor if small solids are known to be in suspension.
Before attempting to use this product, please read this manual thoroughly and
follow the instructions carefully. In doing so you will ensure the safety of yourself
and that of others around you, and you can look forward to your purchase
giving you long and satisfactory service.
SPECIFICATIONS
Please note that the details and specifications contained herein, are correct
at the time of going to print. However, CLARKE International reserve the right
to change specifications at any time without prior notice. Always consult the
pump’s data plate.
Fluid Classification / Fluids to be used
Clean (parafin, light fuel oil, diesel)
Max. Head
6 m
Max. Flowrate (dependant upon
temperature/type of oil)
56 l/min
Duty Cycle
Continuous
Max. Operating Temperature
10 - 70
o
C
Max liquid temperature
40
o
C
Weight (complete)
14 kg
Inlet Hose Length
2 m
Outlet Hose Length
2 m
Power cable length
2 m
Motor
230 Vac~50Hz
Input rated power
450 W
IP Rating
IP 54
Thermal overload protection fitted
Yes
Содержание DFT230
Страница 12: ......