Clarke Devil IRD20B, Инструкция по эксплуатации и техническому обслуживанию

Страница: 9 / 16

9
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
The heater is fitted with an electrical circuit breaker to protect the internal
components from damage. If the heater should fail to work, this fuse may
require checking by your dealer.
The heater is fitted with a tilt switch designed to turn the unit off immediately if
it should tip over beyond a pre-determined angle.
PREPARATION
UNPACKING
1. Remove heater from carton. and remove all protective material used for
shipment.
2. Check the heater for any damage and notify your Clarke dealer
immediately should any be apparent.
NOTE: THERE MAY BE SOME DISCOLOURATION TO THE HEATING ELEMENT,
THIS IS DUE TO THE HEATER BEING TESTED DURING THE
MANUFACTURING PROCESS. THIS DOES NOT INDICATE A FAULT.
3. Fit the carrying handle to the top
of the heater using the screws
supplied.
4. Fit the heatshield to the heater
body using the screws supplied.