10
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
5. Fit the stand to the fuel tank using
the fixings supplied. Note the
correct orientation.
SUITABLE FUELS
Diesel or paraffin are the only fuels
that should be used in this heater.
FILLING THE FUEL TANK
IMPORTANT: In cold weather,
condensation may develop in the tank if the tank is empty. Before filling the
fuel tank for the first time or after extended storage periods, vent the fuel
tank of any moisture or condensation.
1. Follow all of the “Safety Precautions”.
2. Remove the fuel cap.
NOTE:
If you lose the fuel cap a
replacement must be
obtained before use, this is
available from the Clarke
service department.
3. Fill the fuel tank with clean diesel
or paraffin.
4. When refilling, inspect the mesh
filter inside the filler neck for any
trapped contamination and clean out if necessary.
• When filling the heater, make sure that the heater is level and do not
overfill. Use a funnel or can with a long filling spout.
• Fill with a minimum of 4 litres of fuel.
POSITIONING THE HEATER
The heater should not be used in habitable areas. It must be located on a
hard, level surface to minimise the risk of accidentally tipping over. The heater
is not suitable for use on wood floors or other combustible materials. It should
be stood on suitable insulating material at least 26 mm thick and extending
1m or more in all directions.
When the heater is in use, periodically monitor any buildup of heat on nearby
surfaces.
It is important that the heater is positioned with at least 2.5 m clearance at the
front between the heater and any objects or surfaces. Always position the
heater facing the centre of the room, not pointing directly at any nearby
surfaces. Never place any objects on, or against the heater.
Содержание Devil IRD20B
Страница 16: ......
