background image

3

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

GENERAL SAFETY RULES

1. These heaters are for INDOOR USE ONLY.

2. DO NOT expose the heater or power cable to rain or wet conditions. Any 

water entering the heater will increase the risk of electric shock. DO NOT 
use this heater in a bathroom, shower room or any other wet environment. 

3. NEVER locate the heater near combustible materials such as curtains, 

furniture etc. Allow at least 1 metre distance.

4. DO NOT locate the heater close to an adjacent wall or low ceiling. Allow a 

distance of at least 1 metre from a wall or ceiling. Avoid placing the heater 
directly below power socket outlets.

5. Take care to ensure that the wire guard cannot be covered.

6. DO NOT operate heater in explosive atmospheres such as in the presence 

of flammable liquids, gases or dust such as in a paint spray booth or any 
explosive environment.

7. NEVER stand the heater on a movable vehicle where it could tip over.

8. DO NOT allow the halogen tubes to become covered with dust which 

could become a fire hazard. If used in a dusty workplace it should be 
cleaned as described under Cleaning and Maintenance.

9. NEVER touch the halogen tubes for at least 15 minutes after switching off.

10. DO NOT leave the heater unattended.

11. If children are present always use with a fireguard.

12. Store the heater out of the reach of children and do not allow persons 

unfamiliar with these instructions to operate it.

13. Use ONLY in an upright position.

14. ALWAYS manoeuvre the heater using the handles provided and avoid 

trapping the fingers between the handle and the heater body.

15. NEVER leave the heater unattended while in use. Turn off at night if 

unattended.

ELECTRICAL SAFETY

1. Electrical appliances must match the power outlet. Never modify the plug 

in any way. Do not use adaptor plugs with earthed (grounded) appliances. 
Correct plugs and outlets will reduce the risk of electric shock.

2. DO NOT abuse the electrical cable. Never use the cable for pulling or 

unplugging the heater. Keep the cable away from sources of heat, oil, 

Содержание DEVIL 370PC

















Отзывы: