background image

5

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

ELECTRICAL CONNECTIONS

The 230v models are provided with a 13 amp BS 1363 plug, fitted with a 13amp 
fuse and MUST be connected to a standard, 230 Volt (50Hz) electrical supply, 
preferably through a suitably fused isolator switch.

If the plug has to be changed because it is not suitable for your socket or 
because of damage, it must be removed and a replacement fitted, following 
the wiring instructions shown below. The old plug must be discarded safely as 

insertion into a power socket could cause an electrical hazard.

The wires in the mains lead should be 
wired up in accordance with the 
following colour code:

• Connect the GREEN & YELLOW 

wire to the plug terminal 
marked with a letter E or        

• Connect the BROWN wire to the 

plug terminal marked a letter 
“L”.

• Connect the BLUE wire to the 

plug terminal marked a letter “N”.

The fuse in the plug must be replaced with one of the same rating and this 
replacement must be ASTA approved to BS1362.

We strongly recommend that this machine is connected to the mains supply 
via a Residual Current Device (RCD).

If in any doubt, consult a qualified electrician. DO NOT attempt any electrical 
repairs yourself.

WARNING: READ THESE ELECTRICAL SAFETY INSTRUCTIONS THOROUGHLY 
BEFORE CONNECTING THE PRODUCT TO THE POWER SUPPLY.

WARNING: THE WIRES IN THE POWER CABLE OF THIS PRODUCT ARE 
COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE:                  
BLUE = NEUTRAL         BROWN = LIVE          YELLOW AND GREEN = EARTH.

Содержание DEVIL 370PC

















Отзывы: