9
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
ASSEMBLY
ATTACH THE EXTENSION TABLES
1. Turn the table saw upside down.
2. Fix the extension table to the table
saw using two of the M6 x 12 bolts,
washers and nuts supplied.
3. Fit two of the braces to the
extension table using two of the
the M6 x 12 bolts, washers and
nuts supplied.
• The end of the brace nearest to
the table saw body will be
connected later.
4. Put the remaining extension table
on the other side of the table saw
and repeat steps 2-3.
ATTACH THE GUIDE RAIL
Attach the guide rail using 3 M6 x 12
bolts, washers and nuts.
