15
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
MITRE GAUGE
1. Insert the guide bar into one end
of the groove on the table.
2. Loosen the locking knob by
twisting it counterclockwise.
3. Rotate the gauge to the angle
you want.
4. Retighten the locking knob.
SETTING BLADE HEIGHT
Turn the blade height adjusting
handle to set the blade to the
required height.
• Anti-clockwise to raise the
blade.
• Clockwise to lower the blade.
SETTING THE BLADE ANGLE
1. Loosen the bevel lock.
2. Grasp the blade height
adjustment wheel and move it so
that the pointer is aligned with the
required angle shown on the
scale.
3. Lock the blade at the desired
angle by retightening the bevel
lock.
