Clarke CTS11, Инструкция по эксплуатации и обслуживанию

Страница: 5 / 32

5
SAFETY INSTRUCTIONS
KEEP WORK AREA CLEAN : Cluttered areas and benches invite injuries.
CONSIDER WORK AREA ENVIRONMENT: Do not expose power tools to rain. Do not use power tools in
damp, or wet locations. Keep the work area well lit. Do not use this saw in the presence of flammable
liquids or gases.
GUARD AGAINST ELECTRIC SHOCK: Avoid body contact with earthed, or grounded surfaces, e.g. pipes,
radiators, ranges, refrigerators etc.
KEEP CHILDREN AWAY: Do not let children, or persons not involved in the work, touch the tool, or the
extension lead and keep them away from the work area.
STORE IDLE TOOLS: When not in use, all tools should be stored in a dry, locked up place, out of reach of
children.
DO NOT FORCE THE TOOL: It will do the job better and safer at the rate for which it was intended.
USE THE RIGHT TOOL: Do not force small tools, to do the job of a heavy duty tool. Do not use tools for
purposes not intended.
DRESS PROPERLY : Do not wear loose clothing, or jewellery that can be caught in moving parts. Non-skid
footwear is recommended when working outdoors. Wear protective hair covering to contain long hair.
SAFETY GLASSES: Use safety glasses when operating this tool.
DUST MASKS: If the work is dusty, use dust masks to reduce the risk of inhalation of harmful dust.
CONNECT DUST EXTRACTION EQUIPMENT: Always connect a suitable vacuum cleaner attachment.
PROTECT YOUR EARS : Hearing protection should be worn when using this tool.
DO NOT ABUSE THE MAINS LEAD: Never pull the mains lead to disconnect it from the mains socket. Keep
the mains lead away from heat, oil and sharp edges.
SECURE THE WORK: Use clamps, or vices to hold the workpiece. It is safer than using your hand.
DO NOT OVERREACH : Keep proper footing and balance at all times.
MAINTAIN TOOLS WITH CARE: Keep the blade clean for better and safer performance. Follow the
instructions for changing the blade. Inspect the mains lead periodically and if damaged have it
repaired by an authorised service facility. Inspect extension leads periodically and replace if damaged.
Keep all handles and grips dry, clean and free from oil and grease.
DISCONNECT TOOLS: Disconnect tools fro mains supply when not in use, before servicing and when
changing accessories such as blades.
REMOVE ADJUSTING KEYS AND WRENCHES: Form the habit of checking to see that all keys and adjusting
wrenches are removed from the tool before turning it on.
TRANSPORTING THE TABLE SAW: When moving or transporting the table saw, only lift from the table top.
Do not use the blade guard for lifting, moving or transporting the saw.