Clarke CSS400C, Инструкция по эксплуатации и техническому обслуживанию

Страница: 14 / 24

14
ON / OFF SWITCH
To start the saw, press the ON button
(I). To stop, press the OFF button (O).
NOTE: The machine is equipped
with a magnetic switch to
prevent it being switched on
again accidentally after a
power failure.
SPEED SETTING
The speed regulator allows you to set
the blade speed appropriate to the
material to be cut.
The speed may be adjusted from 550
to 1,600 SPM (Strokes Per Minute).
• To increase the strokes per
minute, turn the speed selector
clockwise.
• To decrease the strokes per
minute, turn the speed selector
counterclockwise.
USING THE BUILT IN LIGHT
The built in light will come on automatically whenever the bench grinder is
switched on.
The arm can bend to set the light in a suitable position.
CHANGING THE LIGHT BULB
Remove the bulb by twisting it anticlockwise.
• Replace with an identical bulb available from the Clarke Parts
Department, part number AWNCSS400C026.
SAWDUST BLOWER
The sawdust blower is designed and
preset to direct air to the most
effective point on the cutting line.
Make sure the pressure plate is
adjusted to secure the workpiece
and direct air at the cutting surface.