7
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
MAINTENANCE
DAILY BEFORE USE
1. Drain water from compressor air tank and air line.
2. Check and clean, if necessary, the air inlet gauze filter.
3. If an air system oiler is not being used, lubricate the staple/nail gun daily
with a few drops of air line oil, dripped into the air inlet before use. Clarke
Air Line Oil is available from your CLARKE dealer part no. 3050825.
DURING USE
1. For lubricating the internal components when in operation, an air line
lubricator should be used.
2. If an air system oiler is not being used, lubricate the staple/nail gun every 2
hours with a few drops of air line oil, dripped into the air inlet.
• Clarke Air Line Oil is available from your CLARKE dealer part no.
3050825.
WEEKLY
1. Check the security of the bolts and tighten if necessary.
2. Clean air inlet filter on the staple/nail gun.
STORAGE
1. Clean the nail/staple gun after use.
2. When not in use, disconnect from air supply, clean the staple/nail gun and
store in a safe, dry, childproof location.
WARNING: DISCONNECT THE STAPLE/NAIL GUN FROM THE COMPRESSED
AIR SUPPLY AND EMPTY THE MAGAZINE BEFORE PREFORMING ANY
MAINTENANCE.
