background image

3

GENERAL SAFETY RULES 

WORK AREA 

1.

Keep work area clean and well lit

. Cluttered and dark areas invite accidents. 

2.

Do not operate power tools in explosive atmospheres, such as in the presence of flammable 
liquids, gases or dust.

 Power tools create sparks which may ignite the dust or fumes. 

3.

Keep children and bystanders away while operating a power tool.

 Distractions can cause you to 

lose control. 

ELECTRICAL SAFETY 

1.

Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any 
adapter plugs with earthed (grounded) power tools. 

Unmodified plugs and matching outlets will 

reduce risk of electric shock. 

2.

Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and 
refrigerators.

 There is an increased risk of electric shock if your body is earthed or grounded. 

3.

Do not expose power tools to rain or wet conditions.

 Water entering a power tool will increase 

the risk of electric shock. 

4.

Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. 
Keep cord away from heat, oil, sharp edges or moving parts.

 Damaged or entangled cords 

increase the risk of electric shock.

5.

When operating a power tool outdoors, use an extension cord suitable for outdoor use.

 Use of a 

cord suitable for outdoor use reduces the risk of electric shock. 

PERSONAL SAFETY 

1.

Stay alert, watch what you are doing and use common sense when operating a power tool. Do 
not use a power tool while you are tired or under the influence of drugs, alcohol or medication. 

moment of inattention while operating power tools may result in serious personal injury. 

2.

Use safety equipment. Always wear eye protection.

 Safety equipment such as dust mask, non-

skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce 
personal injuries. 

3.

Avoid accidental starting. Ensure the switch is in the off position before plugging in

. Carrying 

power tools with your finger on the switch or plugging in power tools that have the switch on 
invites accidents. 

4.

Remove any adjusting key or wrench before turning the power tool on.

 A wrench or a key left 

attached to a rotating part of the power tool may result in personal injury. 

5.

Do not overreach. Keep proper footing and balance at all times. 

This enables better control of 

the power tool in unexpected situations. 

6.

Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves 
away from moving parts. 

Loose clothes, jewellery or long hair can be caught in moving parts. 

7.

If devices are provided for the connection of dust extraction and collection facilities, ensure 
these are connected and properly used. 

Use of these devices can reduce dust related hazards.

WARNING: READ ALL INSTRUCTIONS. FAILURE TO FOLLOW ALL 
INSTRUCTIONS LISTED BELOW MAY RESULT IN ELECTRIC SHOCK, FIRE AND/
OR SERIOUS INJURY. SAVE THESE INSTRUCTIONS. 

Содержание CONTRACTOR CON1450WC

















Отзывы: