8
Parts & Service: 020 8988 7400/E-mail:[email protected] or [email protected]
OVERVIEW
The CLARKE CON1200 is a variable-speed drill, equipped with an adjustable
speed controller, high and low gear selection and hammer operation and
has a lock-on button for continuous operation. The drill is supplied with a
depth stop rod and auxiliary handle.
When unpacking, check for damage or shortages etc. Any found should be
reported to your CLARKE dealer where the appliance was originally
purchased. This CON1200 Drill is supplied with the following components:
•
1 x Chuck Key
•
1 x Depth Stop Rod
•
1 x Auxiliary (Side) Handle
•
1 x Instruction Manual (this document)
Drill/Hammer Drill Selector
Depth Stop
Chuck
Gear Selector Knob
Selector Switch
Speed Control
Trigger
Trigger Lock-on Button
Auxiliary Handle
Forward/Reverse
