5
Parts & Service: 020 8988 7400/E-mail:[email protected] or [email protected]
5.
Dress properly.
Do not wear loose clothing or jewellery which may get
caught in moving parts. Wear protective hair covering to contain long
hair. For best footing, wear rubber soled footwear. Keep floor clear of oil,
scrap wood, etc.
6. Concentrate on the job in hand, no matter how trivial it may seem. Be
aware that accidents are caused by carelessness due to familiarity.
7. Switch the machine OFF immediately after the task is completed.
POWER TOOL USE AND CARE
1.
Do not force the machine.
Use the correct power tool for your application.
It will do a better and safer job at the rate for which it was designed.
2.
Do not use the power tool if the trigger does not turn it on and off.
Any
power tool that cannot be controlled with the switch is dangerous and
must be repaired.
3.
Disconnect the power tool from the power supply before making any
adjustments, changing accessories, or storing the tool
. These measures will
reduce the risk of the power tool starting accidentally.
4.
Store power tools out of the reach of children and do not allow persons
unfamiliar with these instructions to operate the power tool
. Power tools
are potentially dangerous in the hands of untrained users.
5.
Maintain power tools in top condition.
Keep tools/ machines clean for the
best and safest performance. Check for misalignment or binding of
moving parts, broken parts, or any condition that may affect the power
tool’s operation. If damaged, have the power tool repaired before use.
Many accidents are caused by poorly maintained power tools.
6.
Use recommended accessories.
The use of improper accessories could be
hazardous.
7.
Machine cleanliness.
Do not allow the ventilation slots in the machine to
become blocked with dust.
8.
Check the power tool for damage before using the machine.
Any
damaged part should be inspected to ensure that it will operate properly
and perform its intended function. Check for alignment of moving parts,
breakage of parts, mountings, and any other condition that may affect
the machines operation. Any damage should be properly repaired or the
part replaced. If in doubt,
DO NOT
use the machine. Consult your local
dealer.
SERVICE
1.
When necessary, have your power tools serviced or repaired by a
qualified person using identical replacement parts.
This will ensure that the
safety of the power tool is maintained.
