14
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
COMPOUND MITRE CUTS
A compound mitre is a cut made using a mitre angle and a bevel angle at the
same time. This is the type of cut used to make frames or boxes with slanting
sides.
1. Set your saw to the required
angles and make a few trial cuts.
2. Practice fitting the cut pieces
together.
3. Always try cuts on a few scrap
pieces of wood to verify the
settings on the saw.
TRANSPORTING THE SAW
1. Lower the head and lock it down
using the head lock pin.
2. Lock the mitre arm with the table
mitre lock.
3. Lock the bevel adjustment handle
with the saw head in the vertical
position to make the tool as
compact as possible.
4. Always lift the saw using the lifting
handle.
Содержание CMS210
Страница 1: ...OPERATION MAINTENANCE INSTRUCTIONS LS0716 210MM 8 MITRE SAW MODEL NO CMS210 PART NO 6500756 ...
Страница 24: ......
