18
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
TRANSPORTING
1. Lower the head and lock it down
using the head lock pin.
2. Slide the head towards you and
secure in place using the slide rail
lock.
3. Lock the mitre arm with the table
mitre lock.
4. Lock the bevel adjustment handle
with the saw head in the vertical
position to make the tool as
compact as possible.
5. Always lift the saw using the lifting handle.
THE LASER GUIDE
Your saw is fitted with a laser guide to assist with accurate cutting.
INSERTING THE BATTERIES
1. Remove the battery cover.
2. Insert 2 x AAA batteries taking
care to follow the polarity
diagram inside the battery
compartment.
3. Replace the battery cover
SWITCHING ON/OFF
Switch the laser on/off using the on/
off switch.
