14
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
BASIC SAW CUTS
VERTICAL STRAIGHT CROSS CUT
1. Release the table mitre lock and
move the arm to the 0° position
and re-tighten the table mitre
lock.
2. Release the slide rail lock, and
push the saw head back to the
rear position.
3. Retighten the slide rail lock.
4. Place the wood to be cut against
the fence.
5. Take hold of the operating handle
and press and hold the blade
guard release lever (1) to release
the head.
6. Squeeze the trigger switch (2) to
start the saw.
7. Lower the head allowing the
blade to cut through the timber
and enter the kerf plate.
• Allow the blade to cut freely.
Do not force the tool.
8. After completing the cut, release
the trigger and return the head to
its upper rest position.
