10
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
BEFORE USE
1. Remove the saw from the packing material carefully.
• The following should be supplied. If anything is missing contact your
dealer.
BENCH MOUNTING
Holes are provided in all four feet to
facilitate bench mounting.
• Always mount your saw firmly
on a level surface to prevent
movement.
The tool can also be mounted to a
piece of 12.5 mm or thicker plywood
which can then be clamped to your
work support or moved to other job
sites and re-clamped when required.
• When mounting your saw to a piece of plywood, make sure that the
mounting screws do not protrude from the bottom of the wood.
• If the saw rocks on the surface, place a thin piece of material under one
saw foot until the saw is firm on the mounting surface.
MITRE SAW STAND (
NOT SUPPLIED
)
You can also mount the machine to
a purpose built mitre saw stand
available from your local Clarke
dealer.
Cross-Cut Mitre Saw with Laser Guide
2 AAA Batteries (for laser guide)
Work Clamp
Spare Pair of Carbon Brushes
2 x Work Supports
Shavings / Dust Collection Bag
254 mm Diameter 60 Tooth TCT Wood
Cutting Blade
Combined 6 mm Hexagon Key and
Cross Head Screwdriver
