18
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
5. Loosen the fixing bolt to
release the ring end of the
chain for the stop pin.
6. Pull the stop pin out of the
baseframe.
7. Insert the lockpin into the hole
at the saw blade cover to
block the blade from rotating
as shown in Fig L.
8. Loosen and remove the bolt
M12 x 30 with the wrench
supplied. Remove the washer
and front retaining disc to
remove the saw blade.
9. Replace all components in
reverse order as shown in Fig M
SHARPENING THE BLADE
The saw blade can be sharpened several times without removing it from the
machine. Use a fine cut square bladed file of 8-12” for sharpening.
CAUTION: INSTALLING THE BLADE THE WRONG WAY ROUND WILL RESULT
IN DAMAGE TO THE BLADE.
Содержание CLS505
Страница 24: ......
