16
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
MAINTENANCE
1. ALWAYS inspect the saw before use and ensure it is in top condition.
2. Ensure that the guard can spring freely back to its closed position and
clean out any debris lodged behind it.
3. Check the power cable to ensure it is sound and free from cracks, bare
wires etc.
4. After use, clean all dust and wood chippings from the saw and its hinged
parts and guards.
5. Ensure motor air vents are clear of debris, (use compressed air to clean the
machine if possible). If using compressed air always wear goggles and a
dust mask.
6. For any problems requiring the dismantling and overhaul of the saw,
contact your CLARKE International Service Department on 020-8988-7400.
STORAGE
1. Store in a clean, dry environment protected from the weather and away
from children and untrained users.
CHANGING THE SAW BLADE
1. Ensure the saw is disconnected from the power supply. Take care that the
saw blade has cooled down before touching if it has just been in use.
SAW BLADE CHANGE
1. Remove the M5 nut and flat
washers from the guard
plateas shown in Fig I.
CAUTION: ONLY USE SAW BLADES WITH THE CORRECT FITTING AS
SUPPLIED. ALWAYS ENSURE THE SAW IS DISCONNECTED FROM THE
POWER SUPPLY BEFORE INSTALLING/REMOVING THE BLADE.
Содержание CLS505
Страница 24: ......
