6
Parts & Service: 020 8988 7400/E-mail:[email protected] or [email protected]
IMPACT WRENCH SAFETY INSTRUCTIONS
a.
ALWAYS
use the impact wrench in the manner and for the functions
described in these instructions.
b.
ALWAYS
ensure the impact wrench is not moving with the switchbar in the
centre position when changing sockets etc.
c. Use only impact wrench sockets. DO NOT use standard sockets.
d.
ALWAYS
finish tightening wheel nuts or engine parts with a torque wrench
or suitable spanner to the correct torque as recommended by the vehicle
manufacturer.
e. ALWAYS
avoid excessive use of the wrench. When tightening a nut or bolt,
never allow the wrench to impact more than 7 or 8 times - to avoid over
tightening - 3 to 4 impacts is normally sufficient.
SERVICE
a.
When necessary, have your power tools serviced or repaired by a
qualified person using identical replacement parts.
This will ensure that the
safety of the power tool is maintained.
Please keep these instructions in a safe place for future reference.
SAFETY SYMBOLS
The full technical specification of the battery charger is printed on a label on
the charger.
The meanings of the markings and symbols on the charger are shown below:
Class II appliance which does not need an earth connection.
Read the instructions before using the equipment.
The equipment falls under the Waste Electrical & Electronic
Equipment directive (WEEE). Do not dispose of with household
rubbish.
For indoor use only.
This charger is fitted with a thermal cutout at 130°C.
Содержание CIR220
Страница 16: ......
