Clarke CHT626, Инструкция пользователя

Страница: 3 / 4

3
SAFETY PRECAUTIONS
ALWAYS take care that your hands or clothing do not come into contact with
the chuck of the drill which drives this attachment. Beware of wearing loose
clothing & ensure cuffs are secured.
ALWAYS learn the applications, limitations and potential hazards relating to
the tool you are using. Read and become familiar with all operating
instructions.
ALWAYS wear safety goggles manufactured to the latest European Safety
Standards when drilling. Everyday eyeglasses do not have impact resistant
lenses and are not safety glasses.
ALWAYS check for damage before use to ensure that the tool will operate
properly. If in doubt, do not use. Consult your local dealer. Any damage
should be properly repaired or the part replaced.
ALWAYS check for alignment of moving parts and any condition that may
affect operation.
ALWAYS keep work area clean. Cluttered areas invite accidents.
ALWAYS ensure that adequate lighting is available and that you will not be
working in your own shadow.
ALWAYS concentrate on the job in hand, no matter how trivial it may seem. Be
aware that accidents are caused by carelessness.
USER INSTRUCTIONS
The CHT626 Drill Attachment is ideal for drilling, polishing, grinding or sanding
in a confined area in conjuntion with most power drills.
1. Install the attachment into the chuck of your power drill. Install a drill bit
into the chuck using the chuck key provided and tighten securely.
2. Plug in and switch on, with the drill set to a reasonably slow speed until
confident of the drilling capability.
3. When drilling, use a steady pressure. Do not force the drill,but allow the drill
bit to do the work. It may be necessary to adjust the speed to suit the size
of drill bit and the material.
4. As a general guide, the larger the hole, the slower the speed required,
also the harder the material being cut, the slower the speed.
CAUTION
• Never use with a drill in ‘hammer’ mode.
• This product must only be used within its maximum speed rating of
6500rpm.