3
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
SAFETY PRECAUTIONS
1. Before moving your Halogen Light or replacing a broken part, always
ensure that the power supply is disconnected at the mains.
2. This unit must not be immersed in water.
3. Do not install this unit within 2 metres of combustible material. The lamp
housing can exceed temperatures of 110
°
C (230
°
F).
4. Do not move your Halogen Light or replace bulbs or broken parts with wet
hands, or when standing on a wet or damp surface or in water. Always
ensure the power supply is disconnected at the mains.
5. The external part of the light head develops high operating temperatures.
To avoid possible injury do not touch. Wait until the power supply has been
disconnected and the unit cooled down.
6. Do not use this lamp in hazardous locations, such as flammable or
explosive environments.
7. Do not sit directly in front of this unit, as the high operating temperatures
can burn the skin.
8. Do not look directly into the lamp when switched on as this can damage
the eyes.
9. When using tripod legs they should be suitably weighted to prevent the unit
from toppling over, causing damage to individuals or property.
10. If used with an extension cable always ensure that the extension cable is
fully unwound.
11. We recommend that a Residual Current Device (RCD) is used in
conjunction with your CLARKE Halogen Light.
12. Do not use this unit if it has a broken lens, casing or damaged supply cable.
13. Always ensure that the front and
the top of the halogen lamp is at
least 1 metre away from any flat
or fixed surface (as shown).
Содержание CHL1000TD
Страница 12: ......
